catalog number :
MBS2023027
products type :
ELISA Kit
products full name :
Osteopontin (OPN) ELISA Kit
products short name :
Osteopontin (OPN)
products name syn :
SPP1; BNSP; BSPI; ETA1; Secreted Phosphoprotein 1; Bone Sialoprotein I; Early T-Lymphocyte Activation 1; Nephropontin; Urinary stone protein; Uropontin
other names :
osteopontin; Osteopontin; osteopontin; secreted phosphoprotein 1; Bone sialoprotein 1; Nephropontin; Secreted phosphoprotein 1; SPP-1; Urinary stone protein; Uropontin
other gene names :
SPP1; SPP1; OPN; BNSP; BSPI; ETA-1; BNSP; OPN; SPP-1
uniprot entry name :
OSTP_HUMAN
specificity :
This assay has high sensitivity and excellent specificity for detection of Osteopontin (OPN). No significant cross-reactivity or interference between Osteopontin (OPN) and analogues was observed.
storage stability :
For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20 degree C upon receipt while the others should be at 4 degree C. For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal. The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
other info1 :
Samples: Serum, plasma, tissue homogenates, Cell lysates and other biological fluids. Assay Type: Sandwich. Detection Range: 0.781-50ng/mL. Sensitivity: Typically less than 0.30ng/mL.
other info2 :
Precision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Osteopontin (OPN) were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Osteopontin (OPN) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100 . Intra-Assay: CV<10% . Inter-Assay: CV<12% . Assay Procedure Summary: 1. Prepare all reagents, samples and standards;. 2. Add 100uL standard or sample to each well. Incubate 2 hours at 37 degree C;. 3. Aspirate and add 100uL prepared Detection Reagent A. Incubate 1 hour at 37 degree C;. 4. Aspirate and wash 3 times;. 5. Add 100uL prepared Detection Reagent B. Incubate 30 minutes at 37 degree C;. 6. Aspirate and wash 5 times;. 7. Add 90uL Substrate Solution. Incubate 15-25 minutes at 37 degree C;. 8. Add 50uL Stop Solution. Read at 450nm immediately.
products description :
Principle of the Assay: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Osteopontin (OPN). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Osteopontin (OPN). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Osteopontin (OPN), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm 10nm. The concentration of Osteopontin (OPN) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
ncbi acc num :
AAA59974.1
ncbi mol weight :
33,843 Da
ncbi pathways :
BDNF Signaling Pathway (712093); Degradation Of The Extracellular Matrix Pathway (576263); Direct P53 Effectors Pathway (137939); ECM-receptor Interaction Pathway (83068); ECM-receptor Interaction Pathway (479); Endochondral Ossification Pathway (198812); Extracellular Matrix Organization Pathway (576262); FGF Signaling Pathway (137989); Focal Adhesion Pathway (198795); Focal Adhesion Pathway (83067)
ncbi summary :
The protein encoded by this gene is involved in the attachment of osteoclasts to the mineralized bone matrix. The encoded protein is secreted and binds hydroxyapatite with high affinity. The osteoclast vitronectin receptor is found in the cell membrane and may be involved in the binding to this protein. This protein is also a cytokine that upregulates expression of interferon-gamma and interleukin-12. Several transcript variants encoding different isoforms have been found for this gene. [provided by RefSeq, Oct 2011]
uniprot summary :
osteopontin: Binds tightly to hydroxyapatite. Appears to form an integral part of the mineralized matrix. Probably important to cell-matrix interaction. Belongs to the osteopontin family. 5 isoforms of the human protein are produced by alternative splicing. Protein type: Secreted, signal peptide; Secreted. Chromosomal Location of Human Ortholog: 4q22.1. Cellular Component: extracellular space; cell projection; apical part of cell; perinuclear region of cytoplasm; extracellular region. Molecular Function: protein binding; extracellular matrix binding; cytokine activity. Biological Process: osteoblast differentiation; neutrophil chemotaxis; extracellular matrix disassembly; extracellular matrix organization and biogenesis; response to vitamin D; biomineral formation; response to steroid hormone stimulus; negative regulation of collateral sprouting of intact axon in response to injury; positive regulation of bone resorption; decidualization; cell adhesion; inflammatory response; embryo implantation
size4 :
10x96-Strip-Wells