product summary
Loading...
company name :
MyBioSource
product type :
ELISA/assay
product name :
Keratin 14 (KRT14) ELISA Kit
catalog :
MBS2019492
quantity :
48-Strip-Wells
price :
515 USD
more info or order :
product information
catalog number :
MBS2019492
products type :
ELISA Kit
products full name :
Keratin 14 (KRT14) ELISA Kit
products short name :
Keratin 14 (KRT14)
products name syn :
CK14; EBS3; EBS4; K14; Cytokeratin 14; Epidermolysis Bullosa Simplex Dowling-Meara Koebner; Keratin, type I cytoskeletal 14
other names :
keratin, type I cytoskeletal 14; Keratin, type I cytoskeletal 14; keratin, type I cytoskeletal 14; keratin 14, type I; Cytokeratin-14; CK-14; Keratin-14; K14
products gene name :
KRT14
other gene names :
KRT14; KRT14; K14; NFJ; CK14; EBS3; EBS4; CK-14; K14
uniprot entry name :
K1C14_HUMAN
reactivity :
Human
sequence length :
472
specificity :
This assay has high sensitivity and excellent specificity for detection of Keratin 14 (KRT14). No significant cross-reactivity or interference between Keratin 14 (KRT14) and analogues was observed.
storage stability :
For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20 degree C upon receipt while the others should be at 4 degree C. For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal. The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
other info1 :
Samples: Serum, plasma, tissue homogenates and other biological fluids. Assay Type: Sandwich. Detection Range: 0.156-10ng/mL. Sensitivity: Typically less than 0.057ng/mL.
other info2 :
Precision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Keratin 14 (KRT14) were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Keratin 14 (KRT14) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100 . Intra-Assay: CV<10% . Inter-Assay: CV<12% . Assay Procedure Summary: 1. Prepare all reagents, samples and standards;. 2. Add 100uL standard or sample to each well. Incubate 2 hours at 37 degree C;. 3. Aspirate and add 100uL prepared Detection Reagent A. Incubate 1 hour at 37 degree C;. 4. Aspirate and wash 3 times;. 5. Add 100uL prepared Detection Reagent B. Incubate 30 minutes at 37 degree C;. 6. Aspirate and wash 5 times;. 7. Add 90uL Substrate Solution. Incubate 15-25 minutes at 37 degree C;. 8. Add 50uL Stop Solution. Read at 450nm immediately.
products description :
Principle of the Assay: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Keratin 14 (KRT14). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Keratin 14 (KRT14). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Keratin 14 (KRT14), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm 10nm. The concentration of Keratin 14 (KRT14) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
ncbi gi num :
15431310
ncbi acc num :
NP_000517.2
ncbi gb acc num :
NM_000526.4
uniprot acc num :
P02533
ncbi mol weight :
51,561 Da
ncbi pathways :
Corticotropin-releasing Hormone Pathway (920957); Glucocorticoid Receptor Regulatory Network Pathway (138014)
ncbi summary :
This gene encodes a member of the keratin family, the most diverse group of intermediate filaments. This gene product, a type I keratin, is usually found as a heterotetramer with two keratin 5 molecules, a type II keratin. Together they form the cytoskeleton of epithelial cells. Mutations in the genes for these keratins are associated with epidermolysis bullosa simplex. At least one pseudogene has been identified at 17p12-p11. [provided by RefSeq, Jul 2008]
uniprot summary :
K14: a type I cytoskeletal keratin. The keratins are intermediate filament proteins responsible for the structural integrity of epithelial cells and are subdivided into cytokeratins and hair keratins. There are two types of cytoskeletal and microfibrillar keratin: type I (acidic; 40-55 kDa) [K9 to K20] and type II (neutral to basic; 56-70 kDa) [K1 to K8]. Both a basic and an acidic keratin are required for filament assembly. Generally associates with K5. Protein type: Cytoskeletal. Chromosomal Location of Human Ortholog: 17q21.2. Cellular Component: cytoplasm; keratin filament; intermediate filament; nucleus; cytosol. Molecular Function: protein binding; structural constituent of cytoskeleton. Biological Process: epidermis development; hemidesmosome assembly; epithelial cell differentiation; response to zinc ion; response to ionizing radiation; intermediate filament bundle assembly; aging; hair cycle. Disease: Epidermolysis Bullosa Simplex, Localized; Epidermolysis Bullosa Simplex, Generalized; Dermatopathia Pigmentosa Reticularis; Epidermolysis Bullosa Simplex, Autosomal Recessive 1; Naegeli Syndrome; Epidermolysis Bullosa Simplex, Dowling-meara Type
size1 :
48-Strip-Wells
price1 :
515 USD
size2 :
96-Strip-Wells
price2 :
695
size3 :
5x96-Strip-Wells
price3 :
2685
size4 :
10x96-Strip-Wells
price4 :
4850
more info or order :
company information
MyBioSource
P.O. Box 153308
San Diego, CA 92195-3308
sales@mybiosource.com
https://www.mybiosource.com
1-888-627-0165
headquarters: USA
MyBioSource, LLC was orginally founded in Vancouver by three enthusiastic scientists who are passionate about providing the world with the best reagents available. Together, they form a company with a big vision known as MyBioSource. MyBioSource is now located in San Diego, California, USA.

"MyBioSource's number 1 vision is to be the world's number 1 quality reagents provider."

Our goal is to provide researchers, scientists and customers alike with a one-stop-shop for all of their reagents needs, whether it is monoclonal antibody, polyclonal antibody, recombinant protein, peptide, etc...

"MyBioSource offers the best products at unbeatable prices."

Please spend a few minutes to browse our online catalogs and see the wide range of products available. We ship our products through our shipping/distribution facility in San Diego, California, USA.

Would you like to receive email and e-newsletter from MyBioSource about new products, special offers and events? Please click here to join our Mailing List!