product summary
Loading...
company name :
Alomone Labs
product type :
chemical
product name :
κ-Conotoxin RIIIK
catalog :
STC-650
more info or order :
image
image 1 :
Alomone Labs STC-650 image 1
image 2 :
Alomone Labs STC-650 image 2
Alomone Labs?-Conotoxin-RIIIK inhibits KV1.2 channels heterologously expressed inXenopusoocytes. - A. Time course of?-Conotoxin-RIIIK(#STC-650) action on KV1.2 currents. Current amplitudes were plotted as a function of time. Membrane potential was held at -80 mV and oocytes were stimulated by a 100 ms voltage ramp to +20 mV. 200 nM ?-Conotoxin-RIIIK was perfused as indicated by the bar at +10 mV. B. Superimposed examples of KV1.2 channel current in the absence (control) and presence of 200 nM ?-Conotoxin-RIIIK (taken from the experiment in A).
product information
cat :
STC-650
SKU :
STC-650_0.1 mg
Product Name :
κ-Conotoxin RIIIK
Group Type :
Non Antibodies
Product Type :
Proteins
Accession :
P69769
Accession Number :
https://www.uniprot.org/uniprotkb/P69769/entry
Applications :
Electrophysiology
Formulation :
Lyophilized from double distilled water (ddH2O). May contain TFA as a residual counter ion.
Storage After Reconstitution :
The reconstituted solution can be stored at 4°C for up to 1 week. For longer periods (up to 6 months), small aliquots should be stored at -20°C. We do not recommend storing the product in working solutions for longer than a few days. Avoid multiple freeze-thaw cycles.
Reconstitution and Solubility :
Centrifuge the vial (10,000 × g for 5 minutes) before adding solvent to spin down all the powder to the bottom of the vial. The lyophilized product may be difficult to visualize. Add solvent directly to the centrifuged vial. Gently tap, tilt, and roll the vial to aid dissolution. Avoid vigorous vortexing; light vortexing for up to 3 seconds is acceptable if needed. The product is soluble in pure water at high micromolar concentrations (100 µM - 1 mM). For long-term storage in solution, we recommend preparing a stock solution by dissolving the product in double-distilled water (ddH2O) at a concentration between 100-1000x of the final working concentration. Divide the stock solution into small aliquots and store at -20°C. Before use, thaw the relevant vial(s) and dilute to the desired working concentration in your working buffer. Centrifuge all product preparations before use. It is recommended to prepare fresh solutions in working buffers just before use. Avoid multiple freeze-thaw cycles to maintain biological activity.
Solubility :
Centrifuge the vial before adding solvent (10,000 x g for 5 minutes) to spin down all the powder to the bottom of the vial. The lyophilized product may be difficult to visualize. Add solvent directly to the centrifuged vial. Tap the vial to aid in dissolving the lyophilized product. Tilt and gently roll the liquid over the walls of the vial. Avoid vigorous vortexing. Light vortexing for up to 3 seconds is acceptable if needed. The product is soluble in pure water at high micromolar concentrations (100 µM - 1 mM). For long-term storage in solution, we recommend preparing a stock solution by dissolving the product in double-distilled water (ddH2O) at a concentration between 100-1000x of the final working concentration. Divide the stock solution into small aliquots and store at -20°C. Before use, thaw the relevant vial(s) and dilute to the desired working concentration in your working buffer. Centrifuge all product preparations before use. It is recommended to prepare fresh solutions in working buffers just before use. Avoid multiple freeze-thaw cycles to maintain biological activity.
Storage Before Reconstitution :
The product is shipped as a lyophilized powder at room temperature. Upon receipt, store the product at -20°C. Protect from moisture.
Origin :
Conus radiatus (Rayed cone)
Source :
Synthetic peptide
Gene ID :
KCNA2
Product Page - Scientific background :
KV1.2 is a mammalian voltage-dependent K+ channel, homologous to the Drosophila Shaker K+ channel. KV1.2 was first cloned from rat brain1. Eight Shaker related genes exist in mammals constituting the KV1, subfamily of the large KV channel family of genes2.The channel is expressed in neurons and cardiac and smooth muscle tissue as well as in retina and pancreas2. The crystal structure of KV1.2 was recently solved shedding light on the structure of a mammalian voltage-dependent channel3. The functional channel is considered low voltage activated and shows very little inactivation. Therefore, this channel activity influences the membrane potential and excitability of neurons and muscle.KV1.2 channels are sensitive to high doses of TEA (560 mM) and low doses of 4-AP (0.59 mM), the "classical" non-selective potassium channel blockers.Conotoxins, which are peptides consisting of 10 to 30 amino acid residues, typically have one or more disulfide bonds. Conotoxins have a variety of mechanisms of actions, most of which have not been determined. However, it appears that many of these peptides modulate the activity of ion channels4.κ-Conotoxin RIIIK is a 24 amino acid peptidyl toxin isolated from the Conus radiatus (Rayed cone) venoM It blocks Shaker and TSha1 K+ channels. Additionally, it was found that κM-conotoxin RIIIK blocks voltage-activated K+ channels with a novel pharmacophore that does not comprise a dyad motif5.
Supplier :
Alomone Labs
Target :
KV1.2 K+ channels
Long Description :
A Specific Potent Blocker of KV1.2 K+ Channels
Short Description :
A Specific Potent Blocker of KV1.2 K+ Channels
MW :
2649 Da
Synonyms :
Kappa-M-RIIIK, Kappa- Conotoxin RIIIK, Conotoxin R3.1
Modifications :
Disulfide bonds between: Cys4-Cys17, Cys5-Cys22, Cys12-Cys23 Thr24- C-terminal amidation X=Hydroxyproline
Molecular formula :
C106H178N34O33S6
Effective Concentration :
0.5 - 200 nM
Activity :
κ-Conotoxin-RIIIK blocks KV1.2 with high potency.
Storage of solutions :
The reconstituted solution can be stored at 4°C for up to 1 week. For longer periods (up to 6 months), small aliquots should be stored at -20°C. We do not recommend storing the product in working solutions for longer than a few days. Avoid multiple freeze-thaw cycles.
Lead Time :
1-2 Business Days
Country of origin :
Israel/IL
Purity :
≥99% (HPLC)
CAS No :
740843-55-4
Form :
Lyophilized
Comment :
Contact Alomone Labs for technical support and product customization
Sequence :
LXSCCSLNLRLCXVXACKRNXCCT-NH2
Is Toxin :
Yes
UNSPSC :
12352202
Bioassay Tested :
yes
Steril endotoxin free :
no
more info or order :
company information
Alomone Labs
Jerusalem BioPark (JBP), Hadassah Ein Kerem
P.O. Box 4287
Jerusalem 9104201
info@alomone.com
http://www.alomone.com
972 2 531 8002
headquarters: Israel